Thank you so much for filling out your survey! As of now, we have 90% of the surveys completed, and this means I now have a pretty good idea of how many items I need to order from my manufacturer~ Please be reminded that orders will be locked tomorrow morning (a reminder email should've been sent out yesterday to everyone who have completed the survey). Please double check your pledges and add-ons if you haven't got a chance to do.
For those of you who haven't completed your survey yet, please kindly have it filled out as soon as you can so that we have a record of what you would like to get for your rewards. Also, please note that tomorrow I will be removing most of my in stock add-on items that are currently available in the pledge manager, but everything from this campaign will still be there. Finally, I will also be closing the pre-order shop tomorrow. If you are interested in this project, and having got an opportunity to pledge yet, this is your last chance to grab these cuties at the backerkit special price!
I also want to take this opportunity to let you know that we need to make a minor change to the Blue Moon pin after talking to my manufacturer. First of all, the parts that connect the tree to the lantern need to be bigger. You can compare the new design to the old design to see the difference. It is a manufacturing requirement in order to make this design work. Secondly, after enlarging those connecting parts, I noticed that if I kept the height of the pin at 1.8", it is very likely that the lantern will be touching the ground where the ghost is now sitting. To avoid this issue, I have slightly increased the height of the tree by 0.1" and that should avoid the problem. Therefore, in the new design, our final height is 1.9". The width will stays the same as 1.2". One last thing I want to clarify is that on the campaign page, I said that the width of this pin is 1.3", but that was actually a typo. The correct width is 1.2". Sorry for the confusion. For Blue Moon sticker, I am going to keep the original look as there is no reason why I have to increase those connecting parts for the sticker.
Please let me know if you have questions or concerns. Thanks again for supporting my project!
