Hello backers, I have another update for you all: the pins have arrived and I am in the process of grading them. There are a lot of pins so it may take me a bit to get through all of them. I will send another update with photos once all the pins are graded. You can find my pin grading policy in my About Page/FAQ, I have also copied the current version below if you have trouble accessing that link.

For now, I've posted videos on Instagram, TikTok, and Tumblr showing them in action.
Astarion and Lae'zel have already been posted separately, you can find them on Instagram, Tiktok, and Tumblr as well.

While you're waiting, now is a great time to review your survey to make sure your address and payment information is correct. If you lost your survey, you can recover it here.

That's all for this update, as always leave me a comment if you have any questions.

I sell pins as “standard” or “seconds” grade.

Standard grade pins may have one or two tiny imperfections. These would be considered A grade. My general rule is, if a pin can be held at half-arm’s length and I cannot see the flaw, it is considered small enough for standard grade. Pins are handmade products so please do not expect a flawless item.

Seconds grade pins have more noticeable flaws, including but not limited to: smudges, specks or bubbles in the enamel, under-filled or over-filled enamel, chips or dents in metal and metal-plating, heavy tarnish, missing or mis-colored enamel, loose pin posts, fused metal, missing metal, missing varnish, uneven linework, bends, and/or scratches. Moving pins that are tough to move are considered seconds grade: for example, a spinning pin with a spinner component that does not spin freely. Seconds pins may not come with backing cards. These pins would be considered B/C grade.

I do not sell or guarantee collector’s grade (S grade) pins! Do not purchase from me if you would not be satisfied with an A grade pin.

My stockists may sell mixed grade pins for certain listings: a mix of standard and seconds grade, so A/B/C grade. Or they may sell only seconds grade pins. Please read the listing descriptions carefully.

Rainbow anodized plating is unique for every pin - no two are alike with differing metal colors. The plating may appear different than the example images shown in the listing.

Anodized and chrome plating is unique for every pin. Texture and variation in plating should be expected. The plating may appear slightly different than the example images shown in the listing, for example it may be slightly lighter or darker. White enamel on this plating may be tinted, this will not be considered a flaw.

Soft enamel with epoxy pins may have minor blemishes, bubbles, or specks in the epoxy. Small areas may not have epoxy. The surface may have variation, texture, or bumps, unlike hard enamel. There may be bits of glitter in non-glitter portions of the pin. Transparent enamel may also have these traits. Since these are unavoidable they will not be considered flaws for the purposes of grading. Epoxy overflow will not be considered a flaw as well since this is also unavoidable in some cases.

Certain plating is prone to tarnish, especially copper, silver, and rose gold plating. I will try my best to sort heavily-tarnished pins as seconds grade, but please note some tarnish may be unavoidable or develop over time if the pin is exposed to moisture and in these cases will be considered standard grade. This tarnish can be removed by gentle polishing with a jewelry cloth.