Still needs to be finalized...will be matte finish with glow details, the same as the pin! (Pin comparison just for reference, this add-on only comes with the 4" sticker)

One spin of the moth gacha, from the pool of unlocked designs. If multiple machines' worth of pins are unlocked, the post-campaign survey will ask whether you want to draw from "Machine 1" (designs 1-8) or "Machine 2" (designs 9-16).

Three spins of the moth gacha, from the pool of unlocked designs. If multiple machines' worth of pins are unlocked, the post-campaign survey will ask whether you want to draw from "Machine 1" (designs 1-8) or "Machine 2" (designs 9-16). Duplicates will NOT be replaced for pledges <5 moth pins.

Five spins of the moth gacha, from the pool of unlocked designs. If multiple machines' worth of pins are unlocked, the post-campaign survey will ask whether you want to draw from "Machine 1" (designs 1-8) or "Machine 2" (designs 9-16). As long as more than the first goal is unlocked, duplicates WILL be replaced unless otherwise requested. Limited to 5.

Ten spins of the moth gacha, from the pool of unlocked designs. If multiple machines' worth of pins are unlocked, the post-campaign survey will ask whether you want to draw from "Machine 1" (designs 1-8) or "Machine 2" (designs 9-16). Duplicates will not be replaced no matter how many goals are unlocked. Limited to 4.

1 spin of the FISH gacha, which is 1 machine of 8 designs as pictured. Limited to 20.

3 spins of the FISH gacha, which is 1 machine of 8 designs as pictured. Duplicates will not be replaced. Limited to 5.

LIMITED TO 5 1 spin in the (dwindling quantities) pill gacha! Most are epoxy, then print, then epoxy again on top - the exception is the constellation pin. Don't worry about the designs that aren't listed as in stock here - there are some set aside for the spins to be fair odds, still. For the open edition pins (r18, eye, red nebula) please get those separately or consider a seconds pin grab bag, they are not in the gacha pool.

1 "Party" design moth pin. 22mm wide soft enamel with epoxy, 6 colors screenprinted.

1 "Checkers" design moth pin. 22mm wide soft enamel with epoxy,2 colors screenprinted.

1 "Illusion" design moth pin. 22mm wide glitter soft enamel with epoxy, 2 colors screenprinted.

1 "Sugar Skull" design moth pin. 22mm wide soft enamel with epoxy, 6 colors screenprinted.

1 "Strawberry Cow" design moth pin. 22mm wide soft enamel with epoxy, 1 color screenprinted.

1 "Cow" design moth pin. 22mm wide soft enamel with epoxy, 1 color screenprinted.

1 "Menhera" design moth pin. 22mm wide glitter soft enamel with epoxy, 2 colors screenprinted.

1 "Heartbreaker" design moth pin. 22mm wide glitter soft enamel with epoxy, 2 colors screenprinted.

1 "Ice Queen" design moth pin. 22mm wide glitter soft enamel with epoxy, 2 colors screenprinted.

1 "Angel" design moth pin. 22mm wide glitter soft enamel with epoxy, 2 colors screenprinted.

1 "Rainbow" design moth pin. This is the same pastel rainbow design as in collection 1, but with glitter this time!! 22mm wide soft enamel with epoxy, 8 colors screenprinted.

1 "Pastel Goth Rainbow" design moth pin. 22mm wide glitter soft enamel with epoxy, 9 colors screenprinted.

1 "Sakura" design moth pin. 22mm wide glitter soft enamel with epoxy, 5 colors screenprinted.

1 "Wood" design moth pin. 22mm wide soft enamel with epoxy, 6 colors screenprinted.

A5 is 5.8"x8.3"! It's quite large. $13 is a discounted price, they will be $15 post-campaign. The display image is poisoned against AI training and has swirly artifacting. It will NOT look this way once printed. The red lines are just to show you where the cut lines will be, and will not be red in the final product. These sticker sheets will have a matte glitter laminate, which has a texture and visually resembles sour gummy coating.

(Sample not yet made, please refer to matte "blue-moth girl" images to see what the matte texture looks like) 4" wingspan with matte laminate. Vibrant hues. Weatherproof vinyl.

4" wingspan with glossy laminate. Vibrant hues, holo is a colorshift rainbow sheen. Weatherproof vinyl.

4" wingspan with matte laminate. Vibrant printing. Weatherproof vinyl.

4" wingspan with glossy laminate. Vibrant hues, holo is a colorshift rainbow sheen. Weatherproof vinyl.

I'm not great with naming more "abstract" OCs and other art pieces, but I think from here on out, she will independently be referred to as "Yumi". Yumi is available as 4" vinyl stickers in either matte (this one), or glitter holographic. Yumi's blue moths are also available as their own holo or matte stickers! The holo on the moth-only stickers is a regular rainbow sheen.

I'm not great with naming more "abstract" OCs and other art pieces, but I think from here on out, she will independently be referred to as "Yumi". Yumi is available as 4" vinyl stickers in either matte, or glitter holographic (this one). The holographic details on this sticker are the moth wings and graffiti! Yumi's blue moths are also available as their own holo or matte stickers! The holo on the moth-only stickers is a regular rainbow sheen.

I'm not great with naming more "abstract" OCs and other art pieces, but I think from here on out, she will independently be referred to as "Mirei". Mirei is available as 4" vinyl stickers in either matte (this one), or glitter holographic. Mirei's blue moths are also available as their own holo or matte stickers! The holo on the moth-only stickers is a regular rainbow sheen. *SLIGHTLY ARTIFACTED TO AVOID ANY POTENTIAL AI TRAINING

20mm tall, "stop! R18" printed in pink over glittery white enamel. Pink metal with epoxy coating. This is a standard grade pin. LIMITED TO 10!

20mm tall, star arrangements printed in white over red-glittery black enamel. Silver metal with epoxy coating. This is a standard grade pin. LIMITED TO 5!

20mm tall, constellation pattern printed in white over glittery black enamel. Silver metal with epoxy coating. This is a standard grade pin. LIMITED TO 5!

20mm tall, biohazard symbol printed in seafoam green over glittery pink enamel. Green metal with epoxy coating. This is a standard grade pin. LIMITED TO 3!

A black U-clasp, and a little battery-powered lantern matching the color of her hair, adorns this single-sided rainbow-acrylic charm featuring the girl with blue moths, "Yumi". I couldn't get out of my head the idea of the moths being attracted to the light source, and had to figure out how to get this to work. The lanterns and clasps are attached to each charm by myself. The acrylic is 65mm wide and I applied the holographic foil transfer on the front myself, so each one might have slight variance in alignment. Keep the little white plastic tab inside the lantern close; pulling that out is the way to turn the LED on, but it also turns it off! Without turning the light back off, the battery will eventually drain out after an accumulative few days' worth of consecutive use. I fully feel these girls would make great wall decor, too!

A black U-clasp and a little battery-powered lantern matching the color of her hair adorns this single-sided rainbow-acrylic charm featuring the girl with grey moths, "Mirei". I couldn't get out of my head the idea of the moths being attracted to the light source, and had to figure out how to get this to work. The lanterns and clasps are attached to each charm by myself. The acrylic is 65mm wide and I applied the holographic foil transfer on the front myself, so each one might have slight variance in alignment. I fully feel these girls would make great wall decor, too!

A black U-clasp OR ball chain, and a little battery-powered lantern matching the color of her hair, adorns this single-sided rainbow-acrylic charm featuring the girl with blue moths, "Yumi". I couldn't get out of my head the idea of the moths being attracted to the light source, and had to figure out how to get this to work. The lanterns and clasps are attached to each charm by myself. There will be a choice in the survey of a U-clasp or ball chain; multiple colors will be an option. The acrylic is 65mm wide and I applied the holographic foil transfer on the front myself, so each one might have slight variance in alignment. Keep the little white plastic tab inside the lantern close; pulling that out is the way to turn the LED on, but it also turns it off! Without turning the light back off, the battery will eventually drain out after an accumulative few days' worth of consecutive use. I fully feel these girls would make great wall decor, too!

A black U-clasp OR ball chain, and a little battery-powered lantern matching the color of her hair, adorns this single-sided rainbow-acrylic charm featuring the girl with grey moths, "Mirei". I couldn't get out of my head the idea of the moths being attracted to the light source, and had to figure out how to get this to work. The lanterns and clasps are attached to each charm by myself. There will be a choice in the survey of a U-clasp or ball chain; multiple colors will be an option. The acrylic is 65mm wide and I applied the holographic foil transfer on the front myself, so each one might have slight variance in alignment. Keep the little white plastic tab inside the lantern close; pulling that out is the way to turn the LED on, but it also turns it off! Without turning the light back off, the battery will eventually drain out after an accumulative few days' worth of consecutive use. I fully feel these girls would make great wall decor, too!

25 (5 of each design) bandages from my originally-designed Pastel Goth set! 5 designs: • 2 colorways of pastel bats on black • black snakes on lilac • barbed wire hearts on pink • repeating syringes with pink liquid on black Full info: • These are waterproof externally, but if you try to apply to a damp surface they will not stick. • They are made of polyethylene and the adhesive is acrylic. • Only approved for single use. • Not for use on infants or toddlers! • CE, ISO 13485 and FDA certified manufacturer

50 (10 of each design) bandages from my originally-designed Pastel Goth set! LIMITED TO 3! 5 designs: • 2 colorways of pastel bats on black • black snakes on lilac • barbed wire hearts on pink • repeating syringes with pink liquid on black Full info: • These are waterproof externally, but if you try to apply to a damp surface they will not stick. • They are made of polyethylene and the adhesive is acrylic. • Only approved for single use. • Not for use on infants or toddlers! • CE, ISO 13485 and FDA certified manufacturer

25 (5 of each design) bandages from my originally-designed Jelly Dessert set! 5 designs: • 3 colorways of one-eyed demon jellies on stripes • 2 colorways of jelly desserts on a gradient background Full info: • These are waterproof externally, but if you try to apply to a damp surface they will not stick. • They are made of polyethylene and the adhesive is acrylic. • Only approved for single use. • Not for use on infants or toddlers! • CE, ISO 13485 and FDA certified manufacturer

50 (10 of each design) bandages from my originally-designed Jelly Desserts set! LIMITED TO 3 Full info: • These are waterproof externally, but if you try to apply to a damp surface they will not stick. • They are made of polyethylene and the adhesive is acrylic. • Only approved for single use. • Not for use on infants or toddlers! • CE, ISO 13485 and FDA certified manufacturer

I found my stash of seconds pins! My loss is your gain. • 5 pill pins at random (NO duplicates!) • Pulling from the "seconds" quality pills that never made it into the gacha pool • Any design could be in the grab bags, including the "open edition" ones, not just the seconds of the ones from the gacha pool. Seconds grade means there are some flaws that may or may not be obvious to you, but to me as the maker they bug me a lot. Examples of some flaws are scratched epoxy, dark or black glitter where it shouldn't be, damaged printing, misaligned printing. Generally, I don't consider anything less than a standard pin unless these are noticeable to me even without glasses on. But while they aren't perfect, they're great for wearing since they can withstand some scuffs, and ita bags are a great use for seconds pins as well. LIMITED TO 10

37mm tall soft enamel with epoxy pin, standard grade (please refer to FAQ for pin grading info!). These are essentially hard enamel in texture. LIMITED TO 10 • Colorful anodized metal • Translucent enamel with raised sandblasted metal details • Glittery enamel "whipped cream" • White screenprint details

37mm tall soft enamel with epoxy pin, standard grade (please refer to FAQ for pin grading info!). These are essentially hard enamel in texture. LIMITED TO 10 • Colorful anodized metal • Translucent enamel with raised sandblasted metal details • Glittery enamel "whipped cream" • White screenprint details

37mm tall soft enamel with epoxy pin, standard grade (please refer to FAQ for pin grading info!). These are essentially hard enamel in texture. LIMITED TO 10 • Colorful anodized metal • Translucent enamel with raised sandblasted metal details • Glittery enamel "whipped cream" • White screenprint details

A rubber keychain of about 3" of my shop mascot, Veek the sweets bat! He's also my customer service rep and can be chatted with on the bottom right corner of the screen when you visit my shop. The Midnight Springs logo is stamped on the back.

This is for a set of 2 silver metal-colored pin-to-magnet converters! You only need 1 per mini pin, as each mini pin only has 1 pin clutch on it. This is not permanent, they can be removed at any time, it does not replace the pin post on the back. They are brass with a silver colored plating. The neodymium magnet is quite strong! (Image representation of magnets not final; there are two types my manufacturer was testing out, whichever is strongest will be used!)

Tip jar for our rescue kitties: Plum, Mocha, Tsuki, Twona, Hades, and Digit - as well as my Heart Cat Luna who I adopted from HSHV 17 years ago. 💝 Available to Emotional Support tier also. Thank you!